|
Product Details:
Payment & Shipping Terms:
|
| Name: | Bod Based Water Wire Screen | Material: | Stainless Steel 304 |
|---|---|---|---|
| Diameter: | 10-3/4" | Slot Size: | 1.0mm |
| Length: | 5.8m | Wire: | 3*4.6mm |
| Support Rod: | ø4.0mm | No. Of Rods: | 55NOS |
| Ends: | Bevel Welded Rings | Usage: | Water Well /oil Well /filter |
| Highlight: | 5.8m Water Wire Screen,5.8m wire mesh pipe,Rod Based Water Wire Screen |
||
Rod Based Water Wire Screen is the largest manufacturer of premium water well screens, bringing the best, most cost efficient water wells to the industry. The continuous slot (vee-wire) design allows lower entrance velocity of the water, which reduces encrustation rates. The vee-wire slot design also resists plugging and prevents sand from damaging pumps.
|
Name: Rod Based Water wire screen,Water well screen, Johnson screen,Wire warp screen,Screen tube,Slotted tube,Wound screen,Continuous slot screen filter,Sand control screen, Wedge wire screen,Oil screen. |
|||||||
|
Material: Stainless steel 304,316L,Non-magnetic Stainless steel, Low carbon galvanized,904L,Duplex steel etc. |
|||||||
|
Diameter: From 29-1300mm (Normal diameter is in the below table) |
|||||||
|
Slot: From 0.1-100mm (Normal slot 0.5mm, 0.63mm, 0.75mm, 1.0mm, 1.5mm, Pls refer to below table) |
|||||||
|
Length: From 100-6000mm (Normal length is 2.9m and 5.8m, to fit container) |
|||||||
|
Wrap wire:2*3.5mm,2.2*3.5mm,2.2*4.5mm,3*4.6mm,3*5mm,3*6mm,3*6.5mm,3.2*6mm,4*7mm etc. |
|||||||
|
Support rod:ø3.0-ø6.0mm round wire, Also can be Vee-shaped wire. |
|||||||
|
Ends:Welded rings/Plain beveled ends,Male/female threaded,Flange etc. |
|||||||
|
Use:Water Well,Waste Water Treatment,Water supply systems,Coal & Mine,Food Processors & Beverage Screens,Environmental protection,Refining & Petrochemical,Architecture & Construction etc. |
|||||||
|
Sizes (inch) |
OD (mm) |
Slot (mm) |
Length (m) |
Tenslie Strength |
Collapse Strength |
Wrap wire Vee-shaped wire(mm) |
Support rod Round wire(mm) |
|
3-1/2 |
88.9 |
1.0 |
2.9 |
＞22 |
10.2 |
2.2*3.5 (Width*height) |
ø3.8MM×22 |
|
4-1/2 |
114.3 |
1.0 |
2.9 |
＞28 |
11.5 |
2.2*3.5(Width*height) |
ø3.8MM×22 |
|
6-5/8 |
168.3 |
0.75 |
5.8 |
＞40 |
12.8 |
2.2*3.5(Width*height) |
ø3.8MM×32 |
|
6-5/8 |
168.3 |
1.0 |
5.8 |
＞33 |
12.8 |
2.2*3.5(Width*height) |
ø3.8MM×32 |
|
6-5/8 |
168.3 |
0.63 |
5.8 |
＞83 |
45 |
3.2*6.0(Width*height) |
ø6.0MM×32 |
|
8-5/8 |
219.1 |
1.0 |
5.8 |
＞34 |
21.9 |
2.3*3.5(Width*height) |
ø3.8MM×48 |
|
8-5/8 |
219.1 |
1.0 |
5.8 |
＞50 |
38.2 |
3.0*5.0(Width*height) |
ø4.0MM×48 |
|
8-5/8 |
219.1 |
1.0 |
5.8 |
＞60 |
46 |
3.2*6.0(Width*height) |
ø5.0MM×48 |
|
10-3/4 |
273.1 |
0.75 |
5.8 |
＞50 |
32.9 |
2.2*3.5(Width*height) |
ø4.0MM×55 |
|
10-3/4 |
273.1 |
1.0 |
5.8 |
＞60 |
39.5 |
3.0*4.6(Width*height) |
ø4.8MM×55 |
|
10-3/4 |
273.1 |
1.0 |
5.8 |
＞100 |
48 |
3.2*6.0(Width*height) |
ø5.0MM×55 |
|
12-3/4 |
323.9 |
1.0 |
5.8 |
＞120 |
37.2 |
3.0*5.0(Width*height) |
ø4.0MM×56 |
|
14 |
355.6 |
1.0 |
2.9 |
＞80 |
37.8 |
3.0*5.0(Width*height) |
ø4.0MM×59 |
|
16 |
426 |
1.0 |
2.9 |
＞80 |
37.5 |
3.0*5.0(Width*height) |
ø4.0MM×54 |
1. It has high mechanical strength, can bear large pressure drop;
2. It has equal slots for filtering, can form equally distributed filter cake, easy to clean for reusing;
3. The wedge type slot can improve backflushing and regeneration performance ;
4. It has resistance for pressure, temperature, aging,corrosion, can be applied for different kinds of fluid .
Contact Person: Mrs. Orange Song
Tel: 008613903185920
Fax: 86-318-7565919
